——— ———
——— ——— The ROLM
phone
LINE buttons identify phone extension numbers. Line buttons are used to answer and
place calls. Picking up the receiver will light your "primary" line.
Other lines can be accessed by simply pressing the respective line button.
Once you pick-up the handset / receiver to answer a call ... do not press the line
button ... you will have answered and then hung-up on that caller.
——— ———
——— ———
The LED (Light Emitting Diode) next to each line
button indicates that lines current status.
..../...
Flash Rate
/
Line Status
Off
= Available
Light Steadily =
In Use
Blinking
= Call Waiting
Flashing
= Ringing
Flickering
=
Forwarded
——— ———
——— ———
Changing your personal telephone ring tone is
done by...
Getting dial tone ......
Dial ...... < The ring tone you hear immediately is your current ring
tone > Press numbers ... thru ...... pausing to hear the available ring tone choices.
When you find the ring tone you want ... Hang-up at that point .... < Only one ring tone is available per set ... individual
lines cannot be programmed with different ring tones > ——— ———
——— ———
Adjusting your telephone ring volume is done by moving the slide bar located on the
underneath or side of the telephone set.
——— ———
——— ———
../..
.
...
...
... thru ...
... pausing to hear the available ring tone choices.
.